SUO: RE: Ballot Results: Both Motions Pass
Dear Colleagues,
Thank you for passing these two motions.
I hope you realise that this will mean we all have to do
some work!
I believe the next thing we need to do is to identify Project
Leaders for these two projects.
Matthew West
Principal Consultant
Shell Information Technology International Limited
Shell Centre, London SE1 7NA, United Kingdom
Tel: +44 20 7934 4490 Other Tel: +44 7796 336538
Email: matthew.west@shell.com
Internet: http://www.shell.com
> -----Original Message-----
> From: jim.s3@juno.com [mailto:jim.s3@juno.com]
> Sent: 11 October 2003 13:46
> To: standard-upper-ontology@ieee.org; SUO-STATUS@ieee.org
> Subject: SUO: Ballot Results: Both Motions Pass
>
>
>
> SUO Members,
>
> Results of 20 Sep 2003 ballot (copy below) are found below.
> Thanks to all who participated.
>
> Jim Schoening
> Chair, IEEE P1600.1 Standard Upper Ontology Working Group
>
> =================================================
>
> Ballot Question #1 (Methodology):
>
> YES: 47
> NO: 0
> ABSTAIN: 5
> Acknowledge (but no vote): 11
> No Response: 17
> Total Number of Voting Members: 79
>
> Motion Passes.
>
>
> Ballot Question #2 (4-dimensional paradigm ontology):
>
> YES: 40
> NO: 6
> ABSTAIN: 5
> Acknowledge (but no vote): 11
> No Response: 17
> Total Number of Voting Members: 79
>
> Motion Passes.
>
> --------- Forwarded message ----------
> From: jim.s3@juno.com
> To: standard-upper-ontology@ieee.org,SUO-STATS@ieee.org
> Date: Sat, 20 Sep 2003 12:09:24 -0400
> Subject: SUO Ballot with 2 Questions
>
> ATTN Voting Members of IEEE P1600.1 Standard Upper Ontology Working
> Group:
>
> 1. Please acknowledge receipt of this ballot by Sept 26,
> 2003. But if
> you vote by that date, there is no need to also acknowledge.
>
> 2. Please cast 2 votes on the below two ballot questions.
>
> 3. Votes may be in the form of YES, NO, or ABSTAIN. Each
> questions will
> pass if both (a majority of voting members either vote or acknowledge
> receipt of the ballot) and (YES votes are greater than [NO
> plus ABSTAIN
> votes]).
>
> 4. The period for voting will end at midnight EDT on Oct 11,
> 2003. If a
> majority of voting members have not yet voted or
> acknowledged, the chair
> may extend the period for voting and may remind those who have not
> responded.
>
> 5. Please email your vote to me, not the SUO list, unless you
> specifically want your vote (and any comments) shared with everyone.
> With 82 voting members, this would be too much list traffic.
>
> 6. Comments and discussions on the merits of these motions
> are permitted
> during the voting period, but the wording will not be changed.
>
> Jim Schoening
> Chair, IEEE P1600.1 Standard Upper Ontology Working Group
> Jim.S3@juno.com
>
> ------------------------------------------------------
> Title: Proposal to Develop a Standardisation Methodology and a
> 4 Dimensional Ontology to be included as Components within
> the Information Flow Framework.
>
> (Note 1 ballot, 2 votes)
>
> ------------------------------------------------------
>
> Ballot Question #1:
>
> The Standard Upper Ontology group approves the objective
> and work programme set out below and encourages its
> members to participate in the programme, developing
> and reviewing the programme deliverables.
>
> Objective
>
> To develop a methodology for the development of standards
> deliverables within the Standard Upper Ontology Workgroup.
>
> Work Programme
>
> 1. Establish a methodology for developing and improving
> SUO standards deliverables including establishing levels
> of deliverable, approvals required to achieve a level,
> and an issue raising and resolution process. Initial
> material to indicate the intent is attached.
>
> -------------------------------------------------------------------
>
> Ballot Question #2:
>
> The Standard Upper Ontology group approves the objective
> and work programme set out below and encourages its
> members to participate in the programme, developing
> and reviewing the programme deliverables.
>
> Objective
>
> To develop a 4 dimensional ontology and include it as
> a component within the Information Flow Framework.
>
> Work Programme
>
> 1. Develop an ontology based on the 4-dimensional
> paradigm. Initial material to act as a start point
> is contained in ISO/FDIS 15926-2.
> http://www.tc184-sc4.org/wg3ndocs/wg3n1328/lifecycle_integrati
on_schema.h
tml
The approach will be to develop the ontology as
reusable components, where appropriate.
2. Make the 4-Dimensional Ontology available as components
within the Information Flow Framework and develop
mappings to other ontologies within the framework.
========End===================
________________________________________________________________
The best thing to hit the internet in years - Juno SpeedBand!
Surf the web up to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!